20 - 4000 Micron Automatic Self Cleaning Filter Brush Type Stainless Steel Housing

20 - 4000 Micron Automatic Self Cleaning Filter Brush Type Stainless Steel Housing

Automatic Self Cleaning Filter Introduction

YF Series Brush Self-cleaning Filter, it can easily and conveniently connect the pipeline in the filtering system, raw water pipeline connects with the inlet, effluent pipeline connect with the outlet, it is can be used in single set, and in parallel multiple sets to get bigger capacity.

Automatic Self Cleaning Water Filter Working Principle

Water is filtered through the fine screen To the outlet. The filtration cake is accumulated on the inner surface of the fine screen causing pressure differential To build up.

Automatic Self Cleaning Filter Technical parameters

■A single maximum flow capacity is up to 4000m3 / h
■Wide filtration range:screens from 4000 to 20 microns
■Working pressure(min)≥0.18Mpa
■Working pressure(max)≤1.6MPa(customized is available)
■Working temperature ≤65℃
■Power supply: 380 v / 50 Hz (Customized is availabel)
■Cleaning method: brush type

Automatic Self Cleaning Filter structure

Automatic Self Cleaning Filter principle

The water flows through the screen and the particles are retained on the inside of the screen of the filter element.

The filtered water then flows out through the outlet.
When the particles accumulated to a certain number and the pressure differential increases to the pre-determined level,

the flushing cycle starts.
It include two steps: First, the automatic drain valve opens on the drainage outlet.

Then, electronic motor drives the cleaning brushes which are inside the screen, the solids are expelled through the drain valve.
Filters continue to supply filtered water even during the flushing cycle.The whole working system is controlled by a smart box which has several control modes: pressure differential, time, manual and PLC.

DLD-FY series self-cleaning filter specification table