Payment & Shipping Terms:
|Material:||Carbon Steel/ Stainless Steel||Working Pressure:||2-8 Bar|
|Control Method:||DP/Time/manual/PLC||Voltage:||220V/50hz(can Be Customized)|
|Backwash Time:||10-200 Sec(optional)||Keyword:||Solid Block Carbon Filters|
activated charcoal water filter,
solid block carbon filters
1. High efficiency: 24 hours continuous operation, no need to stop backwashing.
2, low operating costs: no need for high lift and large flow backwash pump.
3. Low maintenance cost: It has no rotating parts except quartz sand filter material during operation, low failure rate and low maintenance cost.
4, one-time investment is low: no need to set up a separate coagulation tank, clarification tank and other facilities, no need for backwashing pumps and electric, pneumatic valves and other equipment, small amount of engineering, one-time investment.
5, the head loss is small: a single filter material and the filter material is clean and timely, the head loss is small, the total head loss is ≤ 0.5m.
6, the influent water quality requirements are loose: can withstand 150mg / L concentration of SS influent water quality for a long time, short-term 300mg / L concentration SS impact and the water quality does not change.
7. The effluent water quality is stable and the filtration effect is good. The filter material is cleaned in time to ensure high quality and stable water output, and there is no periodic water quality fluctuation.
8. Easy to rebuild and expand: The unit operation mode can be flexibly increased or deleted according to the change of water volume, which is easy to be expanded and expanded.
Activated Carbon filtration systems utilize the adsorptive qualities of the media to remove highly dispersed compounds
from water sources which are too small for removal with standard multi-media filtration technology.
These automatic filtration systems are extremely effective in removing chlorine and chlorine related compounds, organic
chemicals, tastes and odors, halogenated organic compounds, hydrocarbons and other highly dispersed contaminants.
Filtration systems utilize a vertical side shell depth of 72 inches. All
Industrial media filters utilize our simple backwash system for ease of operation and consistent water quality.
The automatically controlled filter systems operate for extended periods of time prior to a short backwash cycle.
■ Removal of chlorines, organic chemicals, taste and odor, halogenated organic compounds, hydrocarbons or other highly
■ Polishing filter for contaminants not removed by other filtration systems
■ 80 psi standard operating pressure (high pressure systems available)
■ Flow ranges from 5 gpm
■ State of the art fabrication provides added strength under pressure and long system life
■ ASME code shaped head construction for durability and safety
■ Stainless steel wedgewire underdrain
➤ Ensures structural integrity in the harshest conditions
➤ Hydraulically balanced to increase effectiveness of backwash while reducing flush frequency and waste of water
➤ High strength stainless steel wedgewire will withstand a collapse pressure in excess of 600 psi
■ Standard carbon steel products, 3/16" thick material
■ Backwash automatically initiated by elapsed time or pressure differential
Contact Person: Yang