Payment & Shipping Terms:
|Housing:||Carbon Steel/stainless Steel||Screen:||SS316L|
|Color:||Green||Working Pressure(max.):||10 Bar|
|Working Pressure(min):||1bar||Filtration Precision:||50/100/200 Micron|
self flushing irrigation filter,
self cleaning sediment water filter
Cooling circulating water system, agricultural irrigation system, steel high pressure descaling system, fire sprinkler system, UF/RO membrane system protection filtration, seawater desalination RO protection filtration, high concentration wastewater treatment, river, river, lake process water treatment, aquaculture Filtration, water/rainwater reuse treatment, wet electric dust removal ash water treatment, spray paint wastewater treatment, automobile assembly test, cutting fluid circulation filtration, tire rubber cooling water filtration, oil recovery water injection filtration, marine press water reuse, water source heat pump Cooling water filtration, waste heat utilization filtration.
The water flows through the screen and the particles are retained on the inside of the screen of the filter element. The filtered water then flows out through the outlet.
Self-cleaning mode can be started by pressing, timing or manual three ways, following the principle of pressure difference.
When the internal and external pressure difference reaches the set value, the self-cleaning mode starts.Drain pipe hydraulic valve open, sucking the scanner to produce negative pressure suction nozzle inside, absorbing impurities, at the same time sucking scanner in under hydraulic motor along the inside surface mesh do reciprocating screw, movement, no cleaning blind area, impurities by the discharge outlet.
The cleaning time of self-cleaning filter is set by the controller in advance, the drain valve is closed after cleaning, and little water loss in cleaning process.
■Filtration precision from 4000 microns -50 microns
■Water flow per unit: 1200m3/h maximum
■Minimum working pressure ≥ 2 bar
■Maximum working pressure＜ 16bar (special customized)
■Working temperature ≤65℃
■Rate operated voltage: three phase,AC220V/ 380V,50Hz or customized.
■ Cleaning method: suction
■ Cleaning time: 10-200 seconds adjustable
■ Control mode: differential pressure, time, manually
DLX-FW series specification data
Contact Person: Yang